ST380011A_希捷 st380011a 接口 - 三兴期货直播间

ST380011A_希捷 st380011a 接口

EIA原油库存数据 http://www.tv-samsung.com

1、ST380011A_希捷 st380011a 接口

微星880gm-e41主板只有一个ide接口,完全可以使用此硬盘。

若光驱也是ide接口:

1.将ide硬盘数据口旁边的跳线zd调成“主”(master),将ide光驱同样位置的跳线调成“从”slave。

2.使用3头扁平80线数据线连接2个设备。

3.开机内按del进入bios,在advanced bios features(bios进阶功能设定)里面first boot device、secord boot device分别设置光驱和硬盘,其余third等、other均改为disable,保存并退出。

4.使用系统光盘安装系统(容同时分区格式化)。

5.安好系统后进入bios将first boot device改为硬盘。

2、ST380011A_st3802110a与st380011a跳线设置

我知道,就是主盘设置跳线,从盘直接插上用,主盘从左数第二竖排跳一下.

3、ST380011A_制造商 Seagate硬盘型号 ST380011A修订版本 8.01是什么意思?是不是过时了?

楼主说的这个硬盘应该是比较老的一种了

是ide接口的了,要说过时么,也不能完全这么说,这样接口的硬盘现在还是能用的。

修订版本8.01是硬件固件的版本号

对于这个型号的硬盘来说应该是比较新的了吧。

4、ST380011A_ST380011A硬盘特性、数据?

容量:80g

接口标准:

ide 转速:7200rpm

缓存容量:2m

平均寻道时间:8.5ms

传输标准:ata 100

st380011a

overview

barracuda 7200.7 : st380011a

barracuda 7200.7

capacity:

speed:

average read time:

cylinders:

heads:

sectors:

80.0 gb

7200 rpm

8.5 ms

1023

256

63

installation guide | product manual

technical specifications

barracuda 7200.7 : st380011a

barracuda 7200.7

capacity:

speed:

average read time:

cylinders:

heads:

sectors:

80.0 gb

7200 rpm

8.5 ms

1023

256

63

installation guide | product manual

seagate technology llc

1-800-seagate

http://www.seagate.com

(c)opyright 2006

st-380011a (barracuda 7200.7 80, ultra ata/100)

�����������ͻ

� rear view �

�����������ͼ

j2 40 pin i/o cable connection

� pin-20 removed

� ��� [spare jumper on pins 5-7]

� �

���������� ������������ͳ����1�/���������\ top (hda)

͵::::::::::�::::::::1� :�: : : � 0 0 0 0 ���

����������������������8�ͳͳͳ���5�g�g�12� bottom

� � � �

� � � ��� limit capacity (see below)

� � ����� reserved

o=off, x=on -->> x-o������ master on

o-o������ slave off

x-x������ slave present (when pins 7-8 on

used on master drive)

o-x������ cable select (when pins 7-8 off)

on drives greater than 33.8gb, limit capacity jumper changes total

available sectors as reported via identify drive data words 60-61 to

33.8gb to solve issues with certain bios during power on. the ata

read native max command will report true full capacity. the ata

set max command will restore true full capacity to the operating

system drivers. third party partitioning software may be needed to

achieve full capacity when using this option jumper.

st-380011a

barracuda 7200.7

formatted capacity (gb) __________________80

actuator type ____________________________voice coil

cylinders __physical______________________

heads ______physical______________________2

discs (3.5 in) ___________________________1

media type _______________________________thin film

head type ________________________________gmr

recording method _________________________eprml 16/17 zbr

internal transfer rate (mbytes/sec) ______up to 85.4

sustained transfer rate (mb/sec)__________up to 58

external transfer rate (mbytes/sec) ______up to 100

pio/dma/udma mode (max) __________________4/2/5

spindle speed (rpm) ______________________7200

average latency (msec) ___________________4.16

buffer ___________________________________2mb

read/write multiple, read look-ahead,

multi-segmented

interface ________________________________ultra ata/100

sectors per drive (lba mode) _____________156,301,488

tpi (tracks per inch) ____________________94,600

bpi (kbits per inch) _____________________up to 595,000

average access (ms seek/read/write) ______/8.5/9.5

single track seek (ms seek/read/write) ___/<1.0/<1.2

max full seek (ms seek/read/write) _______//

mtbf (power-on hours) office _____________600,000

shock (g's, 11ms/2ms):

operating (read/write) __________/63

abnormal ________________________

nonoperating ____________________/350

acoustics (bels)

fluid bearing (typ/max-quiet/max-perf) _<2.2//3.5

power dissipation (watts) ________________

power requirements: +12v start-up (amps) _2.8

power management (watts):

active _______________12.5

idle _________________7.5

standby (typ/max) ____0.9/

physical:

height (inches/mm): 1.028/26.04

width (inches/mm): 4.00/101.6

depth (inches/mm): 5.78/146.9

weight (lb/g): 1.4/635

set cmos hard drive setup to auto-detect with lba mode enabled.

may require formatting and partitioning software to achieve full

capacity.

some systems bios have capacity limitations. types that have

been identified are:

a 2.11gb or 4095 cylinder limitation

a 3.26gb or 6322 cylinder limitation

a 4.22gb or 8192 cylinder limitation

a 8.45gb standard int13 limitation (chs[1024x256x63]x512)

a 33.8gb or 66,060,287 lbas limitation

a 137.4gb or 268,435,455 lbas limitation (28-bit limit)

and, if exceeded, may cause the system to hang during boot,

capacity reduction or it can truncate or wrap the cylinders when

auto-detect options set in the cmos.

new int13 extensions and lba mode in bios and fat32 or ntfs-based

file systems are required to acheive full capacity. fat32 file

system can create single partitions and logical drives up to 2tb.

full-capacity solutions include third-party drive preparation

software, system bios update which supports lba mode or third

party bios driven host adapters.

default chs translation:

16,383 cyl, 16 heads, 63 sectors = 8,455,200,780

========================

windows xp service pack 1 and windows 2000 service pack 3 with

48-bit lba address drivers are required for native support of

ata (ide) disc drives greater than 137gb.

windows 98, windows millennium and windows nt 4.x all have 137gb

native limitations supporting ata (ide) disc drives. third-party

device drivers may be available from motherboard or host adapter

manufacturers for these legacy windows operating systems.

windows 95 fat16 based operating systems are also limited to 8.4gb.

dos 16-bit fat file system cannot access more than 2.147 gbytes per

partition.

already low-level formatted at the factory.

seagate reserves the right to change, without notice, product

offerings or specifications. (02/01/2006)

5、ST380011A_我的希捷硬盘(ST380011A)这是怎么了?

用 效能源 修修看

6、猜你喜欢: